徐州大气颗粒物污染特征及传输途径分析

利用徐州2015年PM2.5和PM10逐小时质量浓度数据,分析了徐州颗粒物时空变化特征。同时基于HYSPLIT后向轨迹模式,结合GDAS气象数据和空气质量数据,利用轨迹聚类及潜在源分析法研究徐州不同季节气流轨迹对颗粒物浓度的影响及PM2.5和PM10的潜在来源。结果显示,2015年徐州环境空气中PM2.5和PM10的年均值为65和122μg/m3,分别超过国家《环境空气质量标准》(GB 3095—2012)二级标准限值86%和63%。各国控站点ρ(PM2.5)和ρ(PM10)月变化呈现一致的冬季高夏季低的"V"型变化特征,这与气象条件和气流轨迹特征季节性变化有关。秋冬季污染较高时期徐州主要受西北内陆性气团和较为稳定的气象条件影响,而春夏季来自较为干净的东部海洋性气团利于污染扩散。潜在源分析显示,山东、安徽、苏中南、浙西北等地区是影响徐州市PM2.5和PM10的主要潜在源区。各季节潜在源区分布范围有一定差异,冬季时潜在源区分布最广,并有明显向西北方向转移延伸的趋势。     

Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

可吸入颗粒物污染与气象因子的关系

对闸北区空气自动监测站2009年SO2、NO2、PM10的浓度和气象参数变化特征进行研究,可吸入颗粒物的时间变化特征表明,总体上呈现冬春季高、夏秋季低;PM10与降水量、相对湿度、温度呈现一定的负相关性,但与风速的相关性随季节不同而不同,与气压略呈正相关性。对典型日和灰霾日PM10、SO2、NO2以及相应气象因子的特征进行了分析比较。     

呼和浩特市工业料堆扬尘排放清单研究

颗粒物污染是影响中国城市空气质量的首要因素。工业料堆扬尘是城市大气颗粒物污染的主要来源之一。本文通过对呼和浩特市建成区内典型行业风蚀、作业及交通运输扬尘进行采样分析,应用美国AP-42提供的模型,以2006年作为基准年,建立了呼和浩特市工业料堆排放清单。研究结果表明:呼和浩特市建成区内工业料堆扬尘排放量为TSP:5 305 t/a,PM10:1 012 t/a,PM2.5:267 t/a。从空间分布看玉泉区工业料堆扬尘排放量最大,其次是赛罕区。行业分布上排放最大的行业是建材工业,其次是电力热力工业,最少的是化工工业。在各行业类别的工业料堆排放量中,交通运输扬尘排放量是最大的。     

城市大气颗粒物背景值涵义及定值方法

城市大气颗粒物背景值的概念对防治城市大气颗粒物污染具有重要意义。城市大气颗粒物背景值不同于颗粒物本底值。本底值是指不受人类活动影响的自然条件下颗粒物的浓度值,而背景值是个相对值,其所在的环境条件有可能已经受到了环境污染。影响城市大气颗粒物背景值的因素主要包括两个方面:一是污染源,主要包括城市本地源排放和外来颗粒物,二是颗粒物扩散的天气和气象因素。将城市大气颗粒物的背景值定义为在一定时期内,由于城市本身的排放,城市大气环境中颗粒物的浓度水平。通过分析总结近年来人们对大气颗粒物垂直分布规律的研究,探讨了采用监测一定高度处大气颗粒物,结合气象因素确定城市环境空气中大气颗粒物背景值的方法。     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

An air quality forecasting system in Beijing - Application to the study of dust storm events in China in May 2008

An air pollution forecast system, ARIA Regional, was implemented in 2007-2008 at the Beijing Municipality Environmental Monitoring Center, providing daily forecast of main pollutant concentrations. The chemistry-transport model CHIMERE was coupled with the dust emission model MB95 for restituting dust storm events in springtime so as to improve forecast results. Dust storm events were sporadic but could be extremely intense and then control air quality indexes close to the source areas but also far in the Beijing area. A dust episode having occurred at the end of May 2008 was analyzed in this article, and its impact of particulate matter on the Chinese air pollution index (API) was evaluated. Following our estimation, about 23 Tg of dust were emitted from source areas in Mongolia and in the Inner Mongolia of China, transporting towards southeast. This episode of dust storm influenced a large part of North China and East China, and also South Korea. The model result was then evaluated using satellite observations and in situ data. The simulated daily concentrations of total suspended particulate at 6:00 UTC had a similar spatial pattern with respect to OMI satellite aerosol index. Temporal evolution of dust plume was evaluated by comparing dust aerosol optical depth (AOD) calculated from the simulations with AOD derived from MODIS satellite products. Finally, the comparison of reported Chinese API in Beijing with API calculated from the simulation including dust emissions had showed the significant improvement of the model results taking into account mineral dust correctly.     

Air quality management in China: Issues, challenges, and options

This article analyzed the control progress and current status of air quality,identified the major air pollution issues and challenges in future,proposed the long-term air pollution control targets,and ...     

腐蚀电池-Fenton处理渗滤液溶解性有机物光谱特征

为了研究垃圾渗滤液中溶解性有机物（DOM）在腐蚀电池-Fenton（CCF）深度处理过程中的去除特性,采用XAD-8和XAD-4树脂将DOM分成5种组分（亲水性有机物HPI、疏水性有机酸HPO-A、过渡亲水性有机酸TPI-A、疏水性中性有机物HPO-N、过渡亲水性中性有机物TPI-N）,并用紫外和荧光光谱对各组分的降解...     

营养盐水平对念珠藻胞外有机物产生的影响

以我国湖泊典型固氮蓝藻发状念珠藻(Nostoc flagelliforme)为研究对象,考察了氮、磷营养盐对发状念珠藻生长特性及其胞外有机物产生的影响.采用藻细胞浓度计数法表征发状念珠藻生长特性;分别采用溶解性有机碳(DOC)、三维荧光光谱(EEM)和紫外-可见光谱法,从总量和主要物质方面分析了发状念珠藻胞外有机物的产生规律.结果表明,在不同氮、磷营养水平下,发状念珠藻的4个关键生长时期基本相同,氮是控制发状念珠藻生长的关键营养控制要素;氮营养元素浓度的增高,有利于发状念珠藻产生胞外有机物,其产生量逐渐增大,而磷营养元素浓度的增高对胞外有机物产生量贡献较小,氮营养盐是发状念珠藻产生胞外有机物的关键限制因子;通过EEM谱图分析,发状念珠藻胞外有机物主要以类氨基酸类物质和类富里酸物质为主.以磷为控制营养盐时,类富里酸是主要的胞外有机物之一,以氮为控制营养盐时,类富里酸产生量极低;作为主要的胞外有机物,蛋白质和碳水化合物的产生规律显著不同,其中蛋白质含量显著高于碳水化合物含量.